Thursday, January 28, 2010

Error about “Bus 0 Enclosure 0” when creating LUN on EMC Clariion array, but your not creating a LUN on “Bus 0 Enclosure 0”

The Exact error is “The RAID group being selected (RAID 1/0, RAID 1) includes disks that are located both in Bus 0 Enclosure 0 as well as some other enclosure(s). This configuration could experience Rebuilds of some disk drives following a power failure event, because Bus 0 Enclosure 0 runs longer than other enclosures during a power failure event.  An alternate configuration where the disks in the RAID group are not split between enclosures in this manner, is recommended.”

The fix was to update my Flare version and everything now works normally.

1 comment:

Unknown said...

Server Enclosures are very best in the safeguarding the servers from dust